Stainless Steel Numbers & Letters
Stainless steel house numbers and letters, cut to a clean modern profile and sold individually. Designed by Hibernate and handmade in Australia, with hidden fixings included.
Pickup available at HIBERNATE WAREHOUSE
Usually ready in 24 hours
Stainless steel house numbers with a clean modern profile
A house number is one of the few exterior details every visitor reads, and it is worth getting right. Our stainless steel house numbers are designed by Hibernate, handmade in Australia and set in a deliberately restrained typeface — no ornament, no flourish, sized to be legible from the street without dominating a facade.
This finish is stainless steel, which stays bright and crisp. Every numeral and letter is sold individually, so you specify exactly what you need: a single digit, a full street number, or steel house letters for a unit or building name. Suitable for exterior walls, brick, timber cladding and gateposts, or as letterbox numbers. Fixings are concealed from the front for a clean face, and are included. We deliver our house numbers Australia-wide.
- Characters available: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b, c
- Material: Stainless steel
- Sold as: Individual numerals and letters
- Suitable for: Exterior walls, gateposts, letterboxes and rendered surfaces
- Fixing: Hidden pins, fixings included
- Installation: See our installation guide
Shipping
Shipping will be calculated at checkout.
Care Guide
Installation Instructions
Into a Brick Wall or Fixed Wall
- Mark out holes to line up with number posts.
- Drill holes using a masonry drill bit of approximately 2-3mm bigger in diameter than the pins to the required depth.
- Blow the dust out of the hole and clean.
- Secure in place using a Chemset 2-part epoxy adhesive (purchased from Bunnings and used in any caulking gun); the epoxy is piped into the holes, and then the pins are inserted into the holes.
- Numbers may need to be temporarily secured using some tape until the glue is set.
Fixing into a surface with access to the back pins
- Mark out holes to line up with number posts.
- Drill holes using a masonry drill bit approximately 2mm bigger in diameter than the pins.
- Blow the dust out of the hole and clean.
- Insert pins and secure them with the nut provided in the box.
Materials
Stainless Steel