Black Stainless Steel Numbers & Letters

$99
Hibernate's new numbers and letters range has arrived. Designed by us, hand made in Australia and looking so beautiful! Available in corten steel, stainless steel, powder coated white and black

View Specifications

Pickup available at HIBERNATE WAREHOUSE

Usually ready in 24 hours

Shipping

Shipping will be calculated at checkout.

Care Guide

Installation Instructions

Into a Brick Wall or Fixed Wall

  1. Mark out holes to line up with number posts.
  2. Drill holes using a masonry drill bit of approximately 2-3mm bigger in diameter than the pins to the required depth. 
  3. Blow the dust out of the hole and clean. 
  4. Secure in place using a Chemset 2-part epoxy adhesive (purchased from Bunnings and used in any caulking gun); the epoxy is piped into the holes, and then the pins are inserted into the holes. 
  5. Numbers may need to be temporarily secured using some tape until the glue is set.

Fixing into a surface with access to the back pins

  1. Mark out holes to line up with number posts.
  2. Drill holes using a masonry drill bit approximately 2mm bigger in diameter than the pins. 
  3. Blow the dust out of the hole and clean. 
  4. Insert pins and secure them with the nut provided in the box.
Materials

Stainless Steel, powder coated

Shop Instagram