Product Installation & Care

We hope your Firedrum brings warmth, connection, and plenty of good times. Made from 3mm corten steel and double-lined for durability, our Firedrums are built to last.

A few hot tips:

• These beauties can mark floor surfaces, so place them on gravel, concrete, or masonry that won’t mind a little character.
• Keep them off timber surfaces, which can scorch or stain.
• Let the good times roll — just not the Firedrum.
  
  
  
  

Our pots are made from marine-grade fibreglass and finished with UV-resistant paint — beautiful and built tough.

Handle with a little TLC:

• Avoid dragging or rolling the pots — always lift to move.
• Be careful near walls to prevent scuffs or chips.
• Dust with a soft cloth, and for any stubborn marks, a damp cloth and natural spray cleaner will do the trick.

Each number and letter is handmade in Australia using high-quality materials: Corten steel, stainless steel, and for our black and white finishes, stainless steel that’s been powder-coated for durability and style.

Our Corten Steel will age gracefully — like all great design — but they can mark some surfaces. So choose your mounting spot with that in mind.

Installation Guide

Into Brick or a Fixed Wall

1. Mark holes to align with the number posts.
2. Drill using a masonry bit approx. 2–3mm wider than the pins, to the right depth.
3. Blow out dust and clean the holes.
4. Use Chemset 2-part epoxy adhesive (from Bunnings) in a caulking gun — fill holes, insert pins.
5. Tape the numbers in place while the glue sets (a bit of patience pays off!).

Into a Surface with Rear Access (lucky you!)

1. Mark holes to align with the number posts.
2. Drill using a masonry bit approx. 2mm wider than the pins.
3. Blow out dust and clean.
4. Insert pins through the back and secure with the nuts provided.